These pumps are typically multi-stage. Intensity of the pump depends on the size of the impeller, and other factors. Head in Circulating pumps of high pressure is achieved by using multiple impellers installed in series. Kinetic energy is converted into pressure in the working part, and partly rectifying apparatus.
Due to the possibility of varying the number of stages Taco 006 pump high pressure develops a higher pressure than low pressure single stage Circulating pumps.
Some pumps are up to 20 degrees. Thus, they can provide pressure up to 250 m. Almost all of the Taco 006 pump pressure, which we have described belong to the family of Dry pump rotor. Nevertheless, in recent years manufacturers successfully equip their engines with wet rotor.
Special instructions for block pumps
• Block pumps should be installed on the respective bases or brackets.
• Installation of block pump, at which the pump rotor and terminal box facing down, is not allowed. All other mounting methods are considered acceptable.
Detailed information on how to install, see the instructions for installation and operation.
